What is the installation notice for the tow chain?

1, if the cable is layered in the form of installation in the chain, when the drag chain changes direction, the cable will not happen to each other blocking.

2, should always confirm that the cable can follow the drag chain movement, without force. 3. When the cable is installed to the towing chain, it cannot twist or curl, the cable must be turned on from the cable disk or reel and cannot be extracted from the top.

Before installation, the cable must be straight-spinning, without distortion, the cable must have a total length of 10% of the allowance, so placed in the chain will not distort.

4. If there is a hydraulic pipe in the tow chain, it can be enlarged or shrunk under the load of the foot without interrupting the operation of the towing chain system. 5, in order to maintain the drag chain in operation to maintain balance, must ensure that the cable weight evenly distributed, heavier on both sides, lighter in the middle.

All cables must be securely fastened to one end of the chain so that the cables can be safely moved to the other end with other devices. 6, flat cable and round cable mixed installed in the chain, the cable must be loosely installed between. The cable must be installed on both sides of the fixture, as far as possible to avoid the next installation of different size round cable.

If you need to put a cable on top of another cable due to limited space, you should install partitions and racks. 7. The cable shall be installed with the clapboard, the spacer or the fixing device with a separate hole so that the cable can move freely in the chain of towing.

The space gap between the cable and the compartment shall be at least 10% of the cable diameter. 8, in order to lay less than 10mm of multi-core high Flexible cable, we recommend the use of guide tube, cable must be loose security, and then the guide tube and drag chain combined. The section area of the guide tube must be greater than the sum of all cable sections. For freely moving tubes, a guide tube or partition must be installed.


Post time: Jan-02-2022